- TypeCargo
Maximum dimensions - platform size of up to 6000mm length and 2800mm in width. A car height of 2200mm is the base standard but can be increased. Any increase does depend upon the headroom available |
Similarly, the standard door height is 2000mm. Larger clear opening heights are available.
The car width is always a minimum of 100mm greater that the door clear opening and the car is 200mm greater in height than the door clear height.
Loads of up to 4500kg are within the standard range. Non standard sizes and loads can be considered.
Single stage direct action pistons up to 3.5m travel.
Two stage telescopic pistons up to 7m travel.
Three stage direct acting telescopic pistons above 7m travel.
Maximum travel 10m (12m available but is dependent on headroom available).
Standard headroom: 3500mm
Standard Pit: 1300mm
The walls & ceiling of the lift car arrive made up into easy assembly modules. The interior of the lift car is manufactured from sheet steel and supplied ready painted. These are powder coated as standard in RAL 7032 but other RAL colours can be selected at extra cost.
Stainless steel car finishes to both walls and floor are available.
2 flush mounted fluorescent light fittings. The floor is constructed from anti-slip steel chequer plate.
Manual multi leaf shutter gates can be supplied in either painted or galvanised finish. Automatic doors are epoxy painted in RAL 7032 grey as standard. Stainless steel finishes are available as an option.
The standard speed is 0.2mps. Higher speeds of 0.3mps and 0.4mps are available.
Standard Features :
Two Car operating panels incorporating: Floor push buttons, Alarm push buttons, Door
open/ door close buttons, Emergency light unit,
Hands free autodialler (with repeater) stations on top and below the car,
Autodialler stations below car for access from lift pit,
Full height door detector,
Digital position indicator,
Audio / visual overload indicator,
Bump rails to car interior