The steam generator is the electrical industry
- Customer pickup,
- In detail
- Country of manufactureRussia
Electric induction steam generator "TITAN" - 600
- The power consumption is 2 times lower than the same equipment
- Time to operation mode for 30 seconds.
- 9 levels of protection established
- Return on investment from 6 months
- Reliability and ease of operation
1. Electric induction steam generator, the continuous - flow type, generating saturated steam, working temperature: 105 - 165 ° C
2. Installed one induction unit, steam capacity: 6 00 kg / steam / hour
3. Installed power consumption: 210 kW
4. An adjustable working pressure steam, 0 - 100% : 7 bar
5. Power supply voltage: 380V
6. Power supply: Three - phase alternating
7. Frequency: 50Hz
8. The three - phase AC switch: noncontact
9. Does not require approval of the regulatory authorities.
10 to the steam generator water treatment required.
11 Dimensions VhDhSh: 1300h1600h900 mm
12 Mass: 750 kg
The principle of operation of the steam generator:
Feed water which has passed water treatment of the filler (condensate) of the tank is forced to the secondary winding of the inductor and rotary high pressure pump where it proceeds almost instantaneously in steam state. The greater number of inducers, the higher the performance of the steam generator, the steam consumption is directly proportional to productivity.
steam generator control of all workflows and Protection, made a touch panel controller "OWEN" (SEC).
The steam generator has nine degrees of protection:
· Vapor pressure greater than the specified limit.
· By the absence of the feedwater in the steam generator system.
· On feedwater temperature, if the temperature has exceeded the allowable limit.
· The temperature of the transformer primary winding, if the temperature has exceeded the allowable limit.
· Superheat secondary inductor winding, when the temperature has exceeded the allowable limit.
· The appearance of scale in the secondary winding of the inductor.
· The temperature of the power unit when the temperature has exceeded the allowable limit.
· On the humidity level inside the steam generator, if the humidity exceeds the allowable limit. (only for models in which the sensor is installed)
· On the violation of the exchange between the SEC and its modules.
Upon request, the steam generator have the capability of manufacturing special design, with the possibility of controlled operating pressure to 12 bar and steam temperature to 188ºS.
The steam generator is equipped with spare parts: the pump washing station PS - 3000