Power Integrator

The Power Integrator takes inputs from the vehicle alternator, solar panel and wind gen-erator then provides the optimum charge for the leisure battery. The unit can boost the input from the alternator, turning it into a multi-stage charging output more suitable for a leisure battery. When used in solar/wind mode, the system acts as a regulator which can also trickle charge the starter battery and help combat drain during winter storage.

Specification:

Electrical
Input Voltage:	11.5V - 25.0V
Output Voltage:
Float only	Flooded	Gel	AGM
Bulk Charge Current	N/A	25A	25A	25A
Absorption Voltage	N/A	14.5V	14.0V	14.6V
Equalisation Voltage	N/A	15.5V(max)	N/A	N/A
Equalisation Current	N/A	5A(max)	N/A	N/A
Float Voltage	13.8V	13.2V	13.5V	13.6V

* - Equalisation stage is only applied 1 in every 10 charge cycles.

Load Range:	0 - 25A
Operating Current:	90mA
Standby current	20mA

Protection
Current limit	@26A +/- .5A
Short circuit protection
Over voltage protection	@16V +/-1.0V
Thermal protection	@90oC +/- 5oC

Dimensions & Weight
Length: 148 mm	Width: 181 mm	Height: 66 mm	Weight: 1.5 Kg