Model Series 35S Flow Fan Powered Terminal Unit VAV

Unique 18 swg (1.2mm thick)
galvanised steel channel space frame
construction provides extreme rigidity
and 18 swg casing components.
• 1.2mm thick galvanised steel inclined
opposed blade primary air damper
operating on a 45° arc.
• Unique perforated baffle on primary
air discharge optimises mixing with
induced air for rapid and effective
temperature equalisation. The baffle
also converts low frequency primary
air damper generated sound into
more readily attenuated higher
frequencies.
• Pressure independent primary
airflow control.
• Multi-point averaging flow sensor.
• Terminal may be field installed either
way up, providing the additional
flexibility of right or left field
connections.
• Access panels on three sides of
terminal for ease of maintenance
and service to motor and fan from
below or from the side of unit.
• Energy saving Nailor EPIC fan
technology
• Motor fan assembly mounted on
special 1.6 mm thick angles and
isolated from casing with rubber
isolators.
• Removable door on controls
enclosure
• Acoustic/thermal lining - the terminal
is internally lined with a 25mm thick
acoustic/thermally insulating foam
which is Melamine based open
cellular construction, having a nonwoven
black tissue facing and
complying with class O fire rating.
This material is adhered to all internal
surfaces and inside box/channel
sections.
• Available with electric or hot water
supplementary heat.
• All controls are mounted on exterior
of terminal providing ready access for
field adjustment.
• Each terminal factory tested prior to
shipment.
• Single point electrical connections.
• Discharge opening designed for
flanged duct connection.