EDCM 300 I/O Module

The CEM eDCM 300 Input/Output Module provides a flexible means to monitor and control a wide array of external equipment. An addition to the Ethernet suite of
devices for use on the CEM AC2000 system, the eDCM 300 I/O connects to the nearest network point to monitor for example windows or machinery.

The eDCM 300 I/O features eight analogue inputs and four outputs that are used to give spare inputs/outputs on the access control system. Each input can be crossmapped to an output. A change of state to a particular input will cause a specific and
definable output from the unit. This means for example an input can be taken from a motion detector and be used to trigger an intruder alarm siren.

The four outputs are comprised of two relay contacts and two open drain FET's acting as switches. The eDCM outputs can be used to control a wide variety of equipment including intruder panels, PIR detectors, heating and lighting controls.

In addition inputs on the eDCM 300 I/O can be used to activate a 'Broadcast Zone' on the AC2000 system. The Broadcast can be configured to activate an output on a
different eDCM 300 I/O or CEM device located anywhere on the network.