CCP Quicklay Beam & Block flooring

CCP Quicklay Beam & Block flooring is manufactured within an enclosed factory environment, and is wet cast in steel beds giving a superior finish and dimensional tolerance.

Specification
Prestressed 'T' Beams are manufactured in two depths, 155mm and 225mm with spans up to 6000mm and 8300mm achievable respectively to BS8110 1985.

Blocks
Blocks will generally be 440x215x100mm 3.5N/mm compressive strength with a density of 1800kg/m. Quicklay Beam and Block Flooring can also be designed to meet other varying block densities and dimensions providing that they have a transverse load capacity of 3.5kN on a 420mm span.

Floor Finishes
Once the floor has been grouted in, a variety of floor finishes can be applied. These may typically be insulation and chipboard, a 50mm sand and cement screed or a 65mm screed on insulation. However, provided that we are informed, whatever floor finishes are required can be catered for and designed into the scheme. Consideration should be given to camber when specifying floor finishes.